iBL-EX320-I8ZC(2.8-12mm) 2 million license plate recognition and capture network explosion-proof camera

name

2 million 1/1.8" CMOS starlight ICR day and night barrel network camera

lens

2.8-12mm F1.4, horizontal field of view 85°~31°

8-32mm F1.4, horizontal field of view 42.2°~13.5°

sensor type

1/1.8" Progressive Scan CMOS

shutter

1 second to 1/100,000 second

Day and night switching mode

ICR infrared filter type

Wide dynamic range

120dB

digital noise reduction

3D digital noise reduction

slow shutter

support

Minimum illumination

Color: 0.0007 Lux @(F1.2,AGC ON);

Black and white: 0.0001Lux @(F1.2,AGCON), 0 Lux with IR

video compression standard

H.265 / H.264 / MJPEG

H.265 encoding type

Main Profile

H.264 encoding type

BaseLine Profile / Main Profile / High Profile

Video compression bit rate

32Kbps~16Mbps

audio compression standard

G.711/G.722.1/G.726/MP2L2/AAC/PCM

Audio compression bit rate

64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-160Kbps(MP2L2)/ 16-64Kbps(AAC)

Main stream resolution and frame rate

50Hz: 25fps (1920 × 1080, 1280 × 960, 1280 × 720),

60Hz: 30fps (1920 × 1080, 1280 × 960, 1280 × 720)

image enhancement

Backlight compensation, fog penetration, electronic image stabilization, 3D noise reduction

maximum image size

1920 × 1080

Resolution and frame rate of the third stream

Independent of the main stream setting, supports up to 50Hz:

25fps (1920 × 1080); 60Hz: 30fps (1920 × 1080)

Image settings

Corridor Mode, Saturation, Brightness, Contrast, Sharpness can be adjusted by client or browser

image overlay

Support BMP 24-bit image overlay, selectable area

Day and night conversion method

Automatic, timing, alarm trigger

area of ​​interest

ROI supports three streams to set 4 fixed areas or dynamic tracking, and supports dynamic tracking of faces

Behavior analysis

Cross-border detection, area intrusion detection, entering/leaving area detection, loitering detection, people gathering detection,

Fast motion detection, parking detection, item left/take detection

Anomaly detection

Scene change detection, audio abnormality (-S support, audio steep rise/drop detection, audio detection),

virtual focus detection

Identification detection

face detection

Vehicle detection: support license plate capture, color, model, main brand, sub-brand, year model, etc. identification, non-human identification

Mixed-traffic detection: Detect vehicles driving in the forward or reverse direction, pedestrians and non-motor vehicles, automatically identify vehicle license plates, and capture pictures of vehicles without license plates.

statistics

Support line count function

Interface Protocol

ONVIF(PROFILE S,PROFILE G),ISAPI,GB28181,Ehome

Smart alarm

Motion detection, occlusion alarm, network cable disconnection, IP address conflict, memory full, memory error, illegal access

General function

One-key recovery, anti-flicker, five-stream, heartbeat, mirroring, password protection, video masking, watermark technology,

IP address filtering

supporting agreement

TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,

PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour

Storage function

Support Micro SD/SDHC/SDXC card (128G) disconnected network local storage and disconnected network resume,

NAS (NFS, SMB/CIFS are supported)

Ambient noise filtering

support

Audio sample rate

Maximum 48KHz

Communication Interface

1 RJ45 10M / 100M/1000M adaptive Ethernet port

video output

1Vp-p Composite Output(75Ω/BNC)

audio port

1 pair of audio input (Line in)/output interface

Alarm interface

2 pairs of alarm input/output interfaces (maximum alarm output supports DC24V 1A or AC110V 500mA)

Communication Interface

Support 1 RS-485 interface

Power interface type

Three-core power interface

Operating temperature and humidity

-30℃~60℃, humidity less than 95% (no condensation)

power supply

DC12V±20% / PoE(802.3at)

Power consumption

DC 12V: 11.5W MAX

PoE: 16.5W MAX

Protection class

IP68

Dimensions (mm)

See drawing

weight

6kg

Infrared irradiation distance

Up to 20-50m

*

*"-S" means that it has 1 pair of audio input (Line in)/output interface,

2 pairs of alarm input/output interfaces (maximum alarm output supports DC24V 1A or AC110V 500mA)

and 1 RS-485 interface

*Recommended to configure two-wire power supply